[smok]

ngarayeva001 said:

You are mixing cetyl alcohol, an oil soluble fatty alcohol,  with water. The only way to do that known to me is to form an emulsion.

If you want to make a conditioning hair spray however,  exclude cetyl alcohol and just add Polyquaternium 7 to water + preservative and you will be ok.

0.5% Polyquaternium 7 is it enouth to or 1%

[smok]

i don’t think there are an emulsifier better than othe
each emulsion needs a precise emulsifier

[smok]

ngarayeva001 said:

Please write it in %. It’s impossible to read in liters and grams. Does it even equal 100%?
Question #1: where is your emulsifier?
Question #2: what do you think glycerine is doing there?
Question #3: citric acid, ok nice. what it the pH?

why i need emulsion?

[smok]

ngarayeva001 said:

Please write it in %. It’s impossible to read in liters and grams. Does it even equal 100%?
Question #1: where is your emulsifier?
Question #2: what do you think glycerine is doing there?
Question #3: citric acid, ok nice. what it the pH?

 aqua
cetyl alcoohol 0.5%

Cetrimonium Chloride 0.5%Perry said:
ph 5.5
glycine to blind parfum
consevateurPharma said:

What is poly7? Polyquaternium 7?

100g glycerol in approximately 20 kg product… why/what for? Is it part of the preservative blend you’re using?

my poly 7 is  myCetrimonium Chloride glycirine to blind parfum

It won’t be very conditioning. You need a cationic surfactant like Cetrimonium Chloride.  And the questions @ngarayeva001 has posted are relevant too.

my poly 7 is  myCetrimonium Chloride

[smok]

ngarayeva001 said:

It will work, but stearic acid, stearyl alcohol and cetearyl alcohol (30:70) are rather draggy on hair. Cetyl would be a better option. 

thanks ely iam happy

[smok]

Perry said:

It depends on the application. Sometimes you can but sometimes you can’t. What do you want to substitute it in?

THAKS PERRY
make conditioner hair

[smok]

royal jelly realy is good for 1 thing

it is good for bees only

[smok]

no

add labs then ph regulation with tea or costic then sles…..

[smok]

i don’t know if you understand my bad english google

the first thing
I think it’s a phisic problem and not chemic…the condicionement of your product
  heat or cold
the second thing to check the prfum always is the problem of separation setrain company melange anything to diliuer the perfume
in my formula i  put labsa double of sles then you have to increase dea
never add the sles before regulations of ph

[smok]

ngarayeva001 said:

Going back to your ingredients,
sodium cocoyl isethionate:
I like SCI but it’s a solid and sometimes it misbehaves in liquid products. You definitely can melt it, but I wouldn’t use it as a primary surfactant. 
Capryl glucoside
Haven’t tried this one, but as per my experience glucosides in shampoos are awful. They tangle hair. You can use it but I am afraid you won’t like the result.
 Disodium cocoamphodiacetate:
Good one.

You might want to replace first two. It is very easy to work with liquid Sodium C14-16 Olefin Sulfonate (it’s not considered a sulfate) and Sodium Lauroyl Sarcosiante. They both can be great primary surfactants. You still can use SCI. For example the combination of Sodium C14-16 Olefin Sulfonate and SCI is used in the most of OGX shampoos. But I wouldn’t go for more than 3-4% of SCI. Disodium cocoamphodiacetate is amphoteric and it will make your shampoo even milder. I would still add Polyquat 10, but it’s up to you. I see some adding glycerin to shampoos but I am not persuaded it has any benefit in rinse off product.

what’s the difference between  Polyquat 10, and 7

[smok]

can you show us the pic

[smok]

Pharma said:

It does have better degreasing properties than plain water… on the other hand, did you ever mix glycerol and oils? What happens if you do?

haha

[smok]

Aziz said:

Please google it . SPF means Sun Scren Protection Factor . Potency of a sun screen is  described by numbers such as SPF 30 , SPF 60 etc . Diffrent ingredients has diffrent protection factors . For more information google search , sun screen protection factors . 

i do not think is about defferent ingredients

[smok]

is reading some article on th internet you call it researchement ??

[smok]

sory i have a bad english

but when add salt  duliete in wataer you mixt the lotion until you get texture

[smok]

what do you think if you try TEA  INSTEAD OF NAOH

[smok]

Gunther said:

myatmyat said:

which are the best formula for transparent dis wash liquid soap?

A shampoo-like SLES+SLS+CAPB formulation will work fine and it’s (mostly) non-irritating, but it doesn’t cut grease as well as sulfonates do.

You can add some ethoxylated fatty alcohol to the above formulation in order to improve grease cutting, while remaining clear.

if it doesn’t cut grease  we can not call it dish waching

[smok]

Gunther said:

myatmyat said:

which are the best formula for transparent dis wash liquid soap?

A shampoo-like SLES+SLS+CAPB formulation will work fine and it’s (mostly) non-irritating, but it doesn’t cut grease as well as sulfonates do.

You can add some ethoxylated fatty alcohol to the above formulation in order to improve grease cutting, while remaining clear.

why all company’s use silfonates  and the product is very transparent

[smok]

2% btaine

add selicone or poly

[smok]

thank you you always you have very good advices

[smok]

I saw somewhere in this forum peg-40 hco and peg-40 there are difference

[smok]

Can i use peg 40 as solubiliser for tocopherol

[smok]

ngarayeva001 said:

I don’t want to discourage people from
asking questions, and I am always ready to respond, however this is exactly a
type of question that makes professional chemists of this forum complain that
it used to be a “safe space” for professionals that is now flooded by dilatants
and home “crappers” (instead of home crafters) as one of the members
phrased it in one of the recent discussions.

You can literally put this question in google and get
the answer. Please make sure you only ask something that Google doesn’t know. Or ask a friendly member in a pm.

Now the answer:
both are surfactants; both are used in
order to make oil and water mix together. The difference is that solubilisers
are used when you need to incorporate a tiny amount of oil into a large amount of water and achieve a clear solution. Example: you need a solubiliser to incorporate 0.5% of fragrance oil into
clear micellar water or a cleanser. You need an emulsifier to make a lotion or
a cream. It will not be clear. Anticipating the next question: the best
solubiliser is PEG-40 HCO. 

unfortunately this answer is not on google

 think the best one is peg-40 not peg-40 hco the last one is emolient

[smok]

it’s the dye that made the problem

[smok]

i know what is pvp and  his role but what is (firm former ) mean