-
What preservatives do you use most often?
What is the most common preservative you use?
I am preparing information on cosmetic preservatives, covering instructions for use such as determination, dissolution, and formulation.Thank you, everyone.
-
59 Replies
-
@ZleyHoldings Cathon CG and Euxyl
-
Phenonip and germall plus (depends on the product)
-
DMDM Hydantoin
-
Sodium benzoate for hair products, KEM NAT for skin products.
-
- Methyl- & Propylparaben or sodium benzoate & potassium sorbate for pharmaceutical preparations (made on prescription at the pharmacy)- Verstatil PC (phenoxyethanol & caprylyl glycol) for trial formulations- Dermosoft 1388 eco (sodium levulinate & sodium anisate) plus glyceryl caprylate plus pentylene glycol plus Magnolia Extract 98 for everything else. Stupid thing is, that cocktail seems to negatively affect viscosity and even break certain emulsions.Obviously, I also add a chelate (phytic acid or EDTA) and antioxidants (different ones, depending on requirements). -
Fekher said:@ZleyHoldings Cathon CG and Euxyl
Thank You
-
ngarayeva001 said:Phenonip and germall plus (depends on the product)
Thank You
-
Perry said:DMDM Hydantoin
Thank You :p
-
Belassi said:Sodium benzoate for hair products, KEM NAT for skin products.
Thank You.
-
Pharma said:- Methyl- & Propylparaben or sodium benzoate & potassium sorbate for pharmaceutical preparations (made on prescription at the pharmacy)- Verstatil PC (phenoxyethanol & caprylyl glycol) for trial formulations- Dermosoft 1388 eco (sodium levulinate & sodium anisate) plus glyceryl caprylate plus pentylene glycol plus Magnolia Extract 98 for everything else. Stupid thing is, that cocktail seems to negatively affect viscosity and even break certain emulsions.Obviously, I also add a chelate (phytic acid or EDTA) and antioxidants (different ones, depending on requirements).
That’s very detailed, thank you.
-
@ZleyHoldings you are welcome.
-
in a previous job I’d use DMDM hydantoin or isothiazolinones for rinse-off products, or Euxyl PE9010 for leave-on products, plus DMDM hydantoin if there were a lot of suspended solids in the product, e.g. claysas it stands, I am restricted to Dermosoft 1388 and GMCY, keeping the pH below 6 if there are suspended solids in the product; propanediol at 10-20% helps as wellin fairness, it works well; thanks to a robust preservative system, and a reliable supply of clean sterilised mains water, it’s very rare for us to have a micro count on any of our products -
Bill_Toge said:in a previous job I’d use DMDM hydantoin or isothiazolinones for rinse-off products, or Euxyl PE9010 for leave-on products, plus DMDM hydantoin if there were a lot of suspended solids in the product, e.g. claysas it stands, I am restricted to Dermosoft 1388 and GMCY, keeping the pH below 6 if there are suspended solids in the product; propanediol at 10-20% helps as wellin fairness, it works well; thanks to a robust preservative system, and a reliable supply of clean sterilised mains water, it’s very rare for us to have a micro count on any of our products
Thanks, but our country has started to reduce the use of DMDM hydantoin and isothiazolinones. Because we feel they can be harmful to the body. Now we are more and more starting to use safer preservatives like chlorphenesin, p-hydroxyacetophenone, and Caprylhydroxamic acid.
-
@ZleyHoldings - While you may “feel” DMDM and isothiazolinones can be harmful to the body, this is not based on scientific evidence. These ingredients have been proven to be safe for use in the way they are used in cosmetics.
If you base your preservative choices on feelings, I’m afraid chlorphenesin won’t make the cut with some consumers. For example, https://www.annmariegianni.com/ingredient-watch-list-chlorphenesin-the-synthetic-preservative-that-can-cause-dermatitis-and-infant-respiratory-distress/
Neither will Carpylhydroxamic acid since it is causing “an epidemic of allergic contact dermatitis” - https://pubmed.ncbi.nlm.nih.gov/28421670/
Traditional preservatives can be used safely. If formulators avoid them and buy into “fear marketing” there aren’t going to be any effective preservatives left.
-
Why p-hydroxyacetophenone isn’t considered a “para-ben” ? lol
-
zetein said:Why p-hydroxyacetophenone isn’t considered a “para-ben” ? lol Because it’s not a benzoic acid derivative.Or are you simply making bad chemistry jokes because all the good ones Argon? Maybe start with more basic stuff, like jokes about sodium hydroxide?
-
Perry said:@ZleyHoldings - While you may “feel” DMDM and isothiazolinones can be harmful to the body, this is not based on scientific evidence. These ingredients have been proven to be safe for use in the way they are used in cosmetics.
If you base your preservative choices on feelings, I’m afraid chlorphenesin won’t make the cut with some consumers. For example, https://www.annmariegianni.com/ingredient-watch-list-chlorphenesin-the-synthetic-preservative-that-can-cause-dermatitis-and-infant-respiratory-distress/
Neither will Carpylhydroxamic acid since it is causing “an epidemic of allergic contact dermatitis” - https://pubmed.ncbi.nlm.nih.gov/28421670/
Traditional preservatives can be used safely. If formulators avoid them and buy into “fear marketing” there aren’t going to be any effective preservatives left.
Okay, thanks. I’ll check the information carefully.
-
I only use Liquid Germall Plus.
-
ngarayeva001 said:Phenonip and germall plus (depends on the product)
Which is more robust for o/w emulsions? Thank you.
-
Spectrastat G2-N or Euxyl K903
-
I’m really struggling with getting a nice preservative.
I’ve started with Liquid Germall Plus, but I’m afraid some of my customers won’t and don’t like the fact, that it’s formaldehyde donor.
So was looking for something different. I found Euxyl PE 9010. I like it, but the smell is just nah. A new one I tried was Geogard Ultra TM (Gluconolactone (and) Sodium Benzoate (and) Calcium Gluconate), it’s a powder, seems to be super nice and easy to use, but it messes up with my pH. So I tried Microcare DB, seems also nice, it’s EcoCert, BUT the smell! So it’s hard to find one without any smell, “scary” names like Parabens or Formaldehyde and won’t mess up with my products.But as for me, I’m using Liquid Germall Plus the most.
Also thinking about Naticide - but I know there’s a smell to it. And it’s expensive.What do you think about Potassium Sorbate & Sodium Benzoate?
-
@emma1985, phenonip is a blend of several parabens and phenoxyethanol and needs heating to reduce possibility of some of the parabens migration to oil phase. It’s generally quite robust. Germall has some limitations: heat sensitive, not allowed under some regulations for applications on large areas, and if I am not wrong there are some limitations for spray products. Germall is great with surfactants (doesn’t mess up viscosity) and in formulations where transparency is important.
-
ngarayeva001 said:@emma1985, phenonip is a blend of several parabens and phenoxyethanol and needs heating to reduce possibility of some of the parabens migration to oil phase. It’s generally quite robust. Germall has some limitations: heat sensitive, not allowed under some regulations for applications on large areas, and if I am not wrong there are some limitations for spray products. Germall is great with surfactants (doesn’t mess up viscosity) and in formulations where transparency is important.
Thank you! I have worshipped at the altar of Germall Plus for so many years but when I read that parabens are (kind of? More?) bulletproof I thought about switching. I want to start selling on a small scale in the future so it’s really important to me that I have extremely robust preservation. I like Germall Plus because I can use it in both water based products (toners and serums,) emulsions and cold process emulsions. It seems phenonip can’t believe used in water based products or cold processed products. It seems Germall Plus is more versatile. Think I’ll stick with it. Thank you so much for the feedback.
Do you have any thoughts on the use of Germall Plus in lip products? I’m thinking about making a lip cream (my lips like a lot of water/hydration in addition to moisture and occlusion.). I think Germall Plus is allowed in lip products in the US but not in the EU. This concerns me a bit. I think Geogard Ect is lip safe but I did a little research and it seems it’s not as effective and broad spectrum as Germall Plus.
-
Since phenonip and germall have different components you can use both if you want a product to be bulletproof. I often do this (germall goes to cool down phase). Regarding lip products, I don’t think germall can be incorporated into an anhydrous balm but if it’s an emulsion you can try. Regarding selling, I think that if you decide to sell you should prioritize safety as much as you can. I assume you buy ingredients from repackagers not from suppliers directly. Ingredients sold by repackagers are compromised from the day one. Big companies can use Euxyl PE 9010 and run PET many times to see if it works (and for them it does) but the same 9010 won’t work for someone who is making at home. Don’t get me wrong, germall is a decent preservative, but have a look into combining it with phenonip in some products.
-
Glyceryl caprylate and caprylhydroxamic acid
Log in to reply.
