Padmavathi
Forum Replies Created
-
@AndrewSeel try CDEA 1%, PEG 150-distearate 1% and PEG/PPG-120/10 Trimethylolpropane Trioleate (and) Laureth-2 1% which is Arlypon TT from BASF. I have used this in a shampoo with NaLS 15% , Decyl glucoside 5% , Lauryl glucoside 5% and CAPB 5%.
-
If the carbopols or ultrezes aren’t available, you can try Rheocare C plus from BASF @ 0.25% , and neutralise with AMP 95. This is for 65% Ethanol based.
-
@ngarayeva001 i work for a distributor of BASF. I’ve used the product you are talking about to make shower oil. My problem here is to stabilize oil and glycerin in the same formulation.
-
@Fekher i tried telling them that but they were very specific about it. I just wanted to see if there was any way i could do it.
@Chemist77 its a body wash not shampoo. -
@bil7 thanks, will try it.
-
@Fekher, @Perry my client wants 15% glycerin and 10% sunflower oil.
@alchemist01 i haven’t tried salt to thicken the formula. will do. -
Yes. Will your formula hold 15% glycerin along with the 10% oil?
-
Where are you based out of?
-
Ive tried amp 95. Will try to get my hands on neutrol te and try it.
-
@Chemist77 okay will try it this way. pH was between 7 and 8.
-
@Chemist77 i took 28% of 6% rheocare c plus solution, added 2% polysorbate 80, 3%PG. mixed it and added 60% IPA. Then neutralised with 4% aminopropanol. Gel was stable, clarity was better than that with carbopol 940. 2% or 3% rheocare c plus solution didnt give gel consistency. I used polysorbate 80 because i read in an article that it could help hold the IPA in a carbomer gel, same reason i used PG.
@Agate 60% IPA was the client requirement. I will check on the 75%.
-
@Chemist77, i tried ultrez 10 and 20, didnt work. Will try to get ultrez 21 and try using it.
@Agate, my client wants IPA specifically as they cant get license to get ethanol. Acrylates C 10-30 alkyl acrylate crosspolymer is ultrez 20 i guess. I added propylene glycol 2%, didnt help.@bahey, i used 4% aminopropanol for neutralising, as triethanolamine or sodium hydroxide didnt work. -
Hi.
There is this product “Salcare SC 95” by BASF. It is *PQ 37, mineral oil and PPG-1 Trideceth-6* . You can try this starting from 0.5% upto 2%, post emulsification.PS: Im completely new to the field, its only been 7 months since i started working.