Forum Replies Created

  • Lilyprincess

    Member
    August 6, 2020 at 4:31 pm in reply to: Please check my formula

    @letsalcido got it! Thanks so much!

  • Lilyprincess

    Member
    August 5, 2020 at 9:29 pm in reply to: Please check my formula

    There are several things that are not quite right with your formulations.

    The scrub:
    - First and foremost, I don’t believe it’s possible to make a stable emulsion with 62% salt.
    - Your water phase is smaller than your oil phase (~16% water phase vs ~20% oil phase), and you’re using an oil-in-water emulsifier when you should have a water-in-oil one.
    - salt dissolves in water, your formula should be anhydrous instead, or some of your salt will be “wasted” by being dissolved in your water phase.
    - it feels waxy because you’re using a lot of waxy , heavy fats (shea and mango butter) and the emulsifier.

    My recommendation for this one is: go simple, and don’t make this any sort of emulsion. Ditch the water phase (xanthan, water, hydrosol…) and the emulsifier (olivem 1000). Then, before making the scrub find a ratio of butters to oils that creates a soft paste (like room temp butter maybe), and see how it feels on your skin (before adding the salt). To make that more rinsable, you’ll want to find a surfactant (think polysorbates, PEGs, etc) that is dispersible in oils. Or you can just omit this part but you’ll have to soap up a lot after using the scrub.

    The lotion:
    With > 35% oils and butters, I don’t think that lotion will absorb quickly by any means. Specially those you’re using which are very heavy and oily. It’s also likely that it’s not stable, you need as much emulsifier as ~20% of your oils. You have around 10% of your oil phase. I would recommend halving the oils and butters (specially if it’s a lotion) you don’t need that much. Or double the emulsifier if you really want to much oil. And add 5-6% of some combination of stearic acid, cetyl alcohol or cetearyl alcohol. You can play with that and do 2% of stearic acid and 4% cetyl alcohol, for example. That will thickening it up pretty good, without using so much oil. 

    Thank you so much! For the surfactant we are looking to use Sodium Cocoyl Isethionate, what percentage would you recommend?

    As for the lotion, will the formula below work better or would you recommend adding cetyl alcohol as well:

    Ingredients:Lotion
    Shea Butter 25 8.33%
    Mango Butter 15 5.00%
    Avocado Oil 8 2.67%
    Safflower Oil 8.1 2.70%
    Grapeseed Oil 13 4.33%
    Olivem 1000 12 4.00%
    Glyceryl Stearate 16 5.33%
    Arrowroot Flour 17.2 5.73%
    Xanthan Gum 0.9 0.30%
    Water 80 26.67%
    Aloe 70 23.33%
    Rose Water 30 10.00%
    Germall Plus 1.5 0.50%
    EO 1.2 0.40%
    Vitamin E2 2.1 0.70% 300
    100.00%

    Thank you in advance! 

  • Lilyprincess

    Member
    August 5, 2020 at 4:24 pm in reply to: Please check my formula

    Thank you so much! For the surfactant we are looking to use Sodium Cocoyl Isethionate, what percentage would you recommend?

    As for the lotion, will the formula below work better or would you recommend adding cetyl alcohol as well:

    Ingredients:Lotion
    Shea Butter 25 8.33%
    Mango Butter 15 5.00%
    Avocado Oil 8 2.67%
    Safflower Oil 8.1 2.70%
    Grapeseed Oil 13 4.33%
    Olivem 1000 12 4.00%
    Glyceryl Stearate 16 5.33%
    Arrowroot Flour 17.2 5.73%
    Xanthan Gum 0.9 0.30%
    Water 80 26.67%
    Aloe 70 23.33%
    Rose Water 30 10.00%
    Germall Plus 1.5 0.50%
    EO 1.2 0.40%
    Vitamin E2 2.1 0.70% 300
    100.00%

    Thank you in advance!