

emily.flemer
Forum Replies Created
-
emily.flemer
MemberDecember 12, 2019 at 8:48 pm in reply to: Formulation - private cosmetic chemist vs inhouse chemistIf we (we are a contract manufacturer) formulate your product, you own it as soon as you are happy with it and pay for it. Every company works different so it is hard to say what the experience with each one.
-
emily.flemer
MemberDecember 12, 2019 at 8:44 pm in reply to: Looking for a supplier or manufacturer to make my body creamIf you are still looking, we have no minimums at all! We have a lot of ingredients in our warehouse that we can possibly use to manufacture your formulation.
Our website is http://www.debutdevelopmentllc.com
We are located in FL USA..
-
Topical for cosmetic procedures.
Monograph seems to state 5%. What about combining lidocaine with something like menthol to increase the potency? Has anyone found anything stating possible OTC limits on that? -
emily.flemer
MemberNovember 7, 2017 at 10:50 pm in reply to: Looking for a West Cost sunscreen manufacturer - any tips?If you’re willing to go east coast, we’re currently doing zero MOQs for OTC production.
I don’t know anyone off hand out in the west who is low MOQ and OTC.
-
emily.flemer
MemberOctober 31, 2017 at 9:51 pm in reply to: US Contract Manufacturers with mineral sunscreen experience?Hi there,
We’d love to help as we are FDA,OTC and have extensive experience with mineral SPF products.
We currently have no MOQs for production and and in house chemist.Looking forward to chatting!
863-448-9081
-
emily.flemer
MemberSeptember 18, 2017 at 2:27 pm in reply to: How can I know that a particular lab or chemist is good?Hi there!
Perry I totally agree. Research is key. I think phone conversation with the chemist are also necessary.
Also asking others who have successfully formulated. Ask them what the selling point for them was. Personally I think the lab should also turn over all rights to you as the owner. -
emily.flemer
MemberSeptember 15, 2017 at 5:01 pm in reply to: How can I know that a particular lab or chemist is good?Hi there,
I’m from a full turn key facility. We focus on helping new brands launch. I’d love to chat!
-
I work with a formulation and development company who has done many soap lines. Let me know if we can be of assistance.
-
If you’re still looking for a lab, we offer full turn key.
If you have any questions, let me know.
Emily@debutdevelopmentllc.com -
emily.flemer
MemberAugust 15, 2017 at 6:30 pm in reply to: WANT TO CREATE HIGHLY EFFECTIVE WATER BASED POMADE FORMULAHi there,
Shoot me an email at Emily@debutdevelopmentllc.com
-
emily.flemer
MemberAugust 15, 2017 at 6:29 pm in reply to: Looking for formulation services for lip gloss and eye shadowHi there,
Shoot me an email at Emily@debutdevelopmentllc.com
-
emily.flemer
MemberJuly 10, 2017 at 8:19 pm in reply to: custom sample base order-what i was offerd -
emily.flemer
MemberJune 28, 2017 at 2:39 pm in reply to: custom sample base order-what i was offerdOur lab offers full ownership at the end of formulation.
Let me know if that is something you’re interested in.
-
Hi I am the business development specialist at Debut Development.
I’d be happy to try and help you.My email is Emily@DebutDevelopmentllc.com
-
emily.flemer
MemberMay 31, 2017 at 6:53 pm in reply to: Looking For Cosmetic Formulation Consultant / Start-Up Batch ManufacturingI’d love to try and help you out.
Debut Development LLC
897 S 6th Avenue, Ste 1
Wauchula, FL 33873
-
emily.flemer
MemberMay 31, 2017 at 6:51 pm in reply to: Anybody interested in starting a short-run formulation, contract manufacturing and filling business?We are currently operating with no minimums. Definitely a gap in the market for this!! Happy to help anyone out there just launching!
Emily Flemer
Business Development Specialist
Debut Development LLC
897 S 6th Avenue, Ste 1
Wauchula, FL 33873
-
emily.flemer
MemberMay 31, 2017 at 6:39 pm in reply to: Short run tube filling and sealing contractWe do no minimum runs. Give me a holler.
Emily Flemer
Business Development Specialist
Debut Development LLC
897 S 6th Avenue, Ste 1
Wauchula, FL 33873
-
Hello,
My name is Emily Flemer and I am the New Business & Client Support
Specialist for Debut Development, LLC. We are a small (5,000 units or less),
OTC certified manufacturer in Florida and have been in business for
approximately 2 years.My email is emily@debutdevelopmentllc.com
If you have any questions, let me know.
-
Hello,
My name is Emily Flemer and I am the New Business & Client Support
Specialist for Debut Development, LLC. We are a small (5,000 units or less),
OTC certified manufacturer in Florida and have been in business for
approximately 2 years.We can fill liquids ranging from water viscosity to creams, lotions, butter and
heavy pastes –powder formulations from fine to coarse. We are well versed in
natural and organic formulations, as well as OTC sunscreens and other health
and beauty products. Bring us a challenge and we will help you create it. Some
of the products we have successfully manufactured are sunscreen, skin serum,
lotion, shampoo, conditioner, hair gel, sun and sting gel, deodorant, laundry
soap, baby ointment, and much more.I am available 9-5, Monday thru Friday at the number below and am happy to
answer any questions you may have about Debut Development. Our current
office phone line is down, but I am available at 407-314-7886Hope to hear from you soon,
Emily
Flemeremily@debutdevelopmentllc.com
http://www.debutdevelopmentllc.com
<edited - PR>
-
My name is Emily Flemer and I am the New Business & Client Support Specialist for Debut Development, LLC. We are a small (5,000 units or less), OTC certified manufacturer in Florida and have been in business for approximately 2 years.
Debut Development focuses on helping start-ups or existing companies bring new products to market. We are uniquely positioned for the challenges of a new brand or product launch that the ‘big boys’ might not want to tackle because we target clients who produce 5,000 units or less. Perhaps our most unique ability is being able to make trial runs or samples for a tradeshow, with no minimums including professional label printing. Our minimum charge for our production line is only $300 and we can tailor a plan to fit any budget and production need. We are able to provide exceptional customer service with one-on-one personal consultations to determine customer needs and help meet their goals. Understanding the challenges of new product development, we have a cosmetic chemist on staff to assist with formulations and scale up as needed. We also partner with other labs for just formulation with no production.
We are part of a business incubator program and can even assist with marketing, drop shipping and more services to help them make their manufacturing dream a reality. It is the perfect place for someone who has outgrown their kitchen “laboratory” and can no longer keep up with production themselves as they start to grow.
-
emily.flemer
MemberJanuary 23, 2017 at 2:02 pm in reply to: Looking to start a brand and need formulation servicesMy name is Emily Flemer and I am the New Business & Client Support Specialist for Debut Development, LLC. We are a small (5,000 units or less), OTC certified manufacturer in Florida and have been in business for approximately 2 years.
-
emily.flemer
MemberJanuary 23, 2017 at 1:59 pm in reply to: Need formulating services? Here are some contactsMy name is Emily Flemer and I am the New Business & Client
Support Specialist for Debut Development, LLC. We are a small (5,000 units or
less), OTC certified manufacturer in Florida and have been in business for
approximately 2 years.Debut Development focuses on helping start-ups or existing companies bring new
products to market. We are uniquely positioned for the challenges of a new
brand or product launch that the ‘big boys’ might not want to tackle because we
target clients who produce 5,000 units or less. Perhaps our most unique ability
is being able to make trial runs or samples for a tradeshow, with no minimums
including professional label printing. Our minimum charge for our production
line is only $300 and we can tailor a plan to fit any budget and production
need. We are able to provide exceptional customer service with one-on-one personal
consultations to determine customer needs and help meet their goals.
Understanding the challenges of new product development, we have a cosmetic
chemist on staff to assist with formulations and scale up as needed. We also
partner with other labs for just formulation with no production.We are part of a business incubator program and can even assist with marketing,
drop shipping and more services to help them make their manufacturing dream a
reality. It is the perfect place for someone who has outgrown their kitchen
“laboratory” and can no longer keep up with production themselves as they start
to grow.