

charmer
Forum Replies Created
-
silica -AEROSIL300-
-
Hello
HydroxyethylAcrylate/SodiumAcryloyldimethylTaurate Copolymer(and) squalane (and) polysorbate 60 = simulgen NS -
salut
elimine de ta liste ces produits et tout ira bien : :
simethicone,Polysorbate-20Peg-12 dimethiconePeg-8 beeswax
pvp -
OK no problem , i need 100-200 kg to use in a face scrub mask .
-
I BELEIVE THAT YOU ARE MORE INTELLIGENT THAN THIS.
I SPEAK 4 LANGUAGES , AND YOU?
SORRY ,JOKE/ONE MORE LESSON IN LIFE. -
+100 KG
-
try to use ceteareth-30 about 18-20% with peg-7 glyceryl cocoate 8-10%
-
WITH GREAT AMOUNT THE PROBLEM WILL BE RESOLVED
-
the best for me is ARLYPON TT FROM BASF.
-
I worked on a similar project for 6 months, believe me you should never think you can add pvp and the product remains transparent (impossible), then the largest council a problem you will discover it is the color transformation of the cream that turns yellow or Crystal orange because of the perfume, so you have to do with your perfume to properly formulate a fragrance that is heat resistant, because such products must be packed in pots has a temperature above 60 °.
-
with Stearamidopropyl dimethylamine you need cathionic ppolymer like cosmedia ultragel 300 fROM basf or cosmedia triple c.
and you can add dimethicone 1%. -
PVP K30 UP 3%+ GLYCERIN UP 2%
-
LEAVE ON 0.1-0.3%
RINSE OFF0.4-1% -
Hello :
ARP 100 from GREENTECH( Serenoa Serrulata Fruit Extract, Epilobium Angustifolium Extract,
Cucurbita Pepo (Pumpkin) Seed Extract )After two depilation cycles, ARP 100 used at
5% limits the fresh hair growth by 37% -
APRES REFLEXION JE PENSE QUE VOUS DEVRIEZ CHANGER DE BILLES
-
Croyez MOI JE ME SUIS Penché sur la réalisation de projet CE pendants 12 mois
pouqu’en fin j’ai obtenu un résultat.La chose que je te veux Comprendre cest Pourquoi compliquéz vous cette formuleenlevez le PEG-8 , LA SIMETHICONE ET LE PVP ET CA IRA BIEN -
bonjour
utilisez SEPINOV EMT 1.5%+SEPIMAX ZEN 1 % ET VOUS AUREZ UNE TEXTURE DE CREME GEL IMPRESSIONNANTE. -
hello
1/400 g minimum batch2/let stand the final product a few daysIf the bubbles do not disappear, you have to play on the viscosity by decreasing the percentage of cocamide DEA or xanthan gum or surfactants. -
charmer
MemberJuly 18, 2015 at 3:48 pm in reply to: Need formulating services? Here are some contactsj’occupe la fonction de directeur de lformulation
Dans Une Grande Société cosmetique en Algerie depuis 5 ansj ‘ai effectué des stages a GRACE en france pour le choix des poarfumspour n’impote quelle formulation ou conseil ,ontactez moi. -
l’EDTA tétrasodique 0,05 à 0,1% MAX
Certaines couleurs sont stables par rapport à AUTRESBENZOPHERONE3 0,02 à 0,05%WITH SMALL AMOUNT OF AQUA -
What beads you used,?
And how you process the mixture?FIRST you must decrease BETAINE TO 12%