Home Cosmetic Science Talk Formulating Liquid handwash formulation

  • ketchito

    Member
    September 27, 2020 at 12:32 pm

    @ankita I’d first ask if the color fades after 15 days exposed to sunlight or UV light? If so, you need to add a UV filter. If that’s not the case, check for the pH and if your dye is acidic or basic (in case it’s basic, it might be reacting with SLES, so you need to change to an acidic dye).

  • AuroraBorealis

    Member
    September 28, 2020 at 1:38 am

    What color are you using? is it disappearing how ? some reds are notorious for fading away in light but I can’t say without knnowing what colorant you’re using.

  • ankita

    Member
    September 29, 2020 at 4:28 pm

    @ketchito ….I am using local cosmetic violet color which has acidic pH.

  • belassi

    Member
    September 29, 2020 at 6:13 pm

    The last time I used violet it turned to turquoise when exposed to sunlight. You could see the change it was so fast. For a while I considered selling colour-changing shampoo. But no.

  • SunSkin

    Member
    September 29, 2020 at 11:36 pm

    What kind of pigment are you using to color your shampoo? As ketchito mentioned, your formula could benefit from a UV protector, that’s what we did with our liquid hand soap when the color started to fade after being in direct sunlight for about a month. 

    But there’s really no way of knowing if that’s your issue without knowing what your whole formula looks like, with all components and percentages, and knowing more details about what is going on, if this change is happening during stability testing at high temperautures, or just sitting in your self undisturbed for 15 days.

  • ankita

    Member
    October 5, 2020 at 2:44 pm

    Any uv absorber or uv protectant for handwash?

  • ketchito

    Member
    October 6, 2020 at 1:35 pm

    @ankita Benzophenone-4 is the most common and cheapest one for these type of products. You can also use Tinogard TT.

  • Dr Catherine Pratt

    Member
    October 7, 2020 at 10:11 am

    You could also use a buffer like Sodium Citrate & Ascorbic acid to aid stability. However, if the pH is fluctuating then you may want to change color it becomes painful. Good Luck!
    best Catherine 

  • chemist1

    Member
    November 4, 2020 at 10:01 pm

    I would suggest a chelant as well.  Depending on the quality of your water you are using.   Also, is the color fading or shifting?  You are using essential oils as well that can change over time.  

Log in to reply.