Article by: Perry Romanowski

Click here for a complete list of the the Cosmetic Formulation Basics series.

Shaving Cream

Shaving cream is a product put on the skin (primarily face and legs) to provide lubrication which helps prevent razor burn and discomfort during shaving.  It comes in a wide variety of formats including creams, gels and most commonly foams.

What shaving creams do

Shaving creams are placed on the area of the skin in which shaving will take place.  The cream is spread in a thick layer where it coats the hair that will be removed.  One benefit of the foam is that it lets the consumer know where they still need to shave.  The consumer (or operator) then takes a razor and slowly runs it through the shaving cream.  This removes the cream and hair.  The razor is rinsed and subsequent passes of it on the skin removes the rest of the unwanted hair.

How shaving cream works

Shaving cream formulations have a number of different ways in which they help in the removal of unwanted hair.  One function is to soften the hair via moisturization to make cutting easier.  Wet hair is easier to cut.  Another function is to act as a lubricant between the razor and the skin.  This inhibits cuts and knicks but does not interfere with hair removal.

Shaving Cream ingredients

While shaving creams can take many forms from liquids, lotions, gels, and creams, they all contain ingredients that help soften the hair and lubricate the skin.  The primary ingredients include surfactants, solvents, humectants, conditioning agents, lubricants and aesthetic ingredients.

The most common surfactants used in shaving creams are soap based surfactants such as Stearic Acid, Palmitic Acid, or other coconut fatty acids.  These are neutralized with TEA, NaOH, or KOH.  Additional foam stabilizing surfactants may also be used such as Sodium Lauryl Sulfate.  The surfactant system typcially makes up about 10% of the formulation.

To lubricate and moisturize the skin, humectants and other conditioning ingredients are included.  These can be mineral oil, lanolin, glycerin, guar gums, or a variety of polyquaternium compounds.  These ingredients make up around 5-10% of the formula.

The other ingredients include aesthetic materials like fragrance, preservatives, pH adjusting materials and sometimes colorants.  For aerosol systems a propellant is needed.  This can be something like Isobutane.  In California, there is a 5% limit on the amount of VOCs that can be used in a shaving cream foam.  Fortunately, the typical propellant level is between 3 and 4%.

Below is an example of a typical shaving cream formula (click to enlarge).*
*Formula from HallStar.

Click this link if you are interested in learning more about our cosmetic science training program.


About the Author

Perry Romanowski

Perry has been formulating cosmetic products and inventing solutions to solve consumer problems since the early 1990’s. Additionally, he has written and edited numerous articles and books, taught continuing education classes for industry scientists, and developed successful websites. His latest book is Beginning Cosmetic Chemistry 3rd Edition published by Allured.


  1. Avatar

    Hii perry
    Can u plz suggest me an gud mild surfactant for shaving cream having gud lather power,,
    Second is what u think ph of shaving cream should be ?

  2. Avatar
    virendra yadav

    i am a cosmatic product resarch and dovelopment analysis chemist all formulation contact. 9654154401

    1. Avatar

      Dear yadav

      I need formulation of After shaving lotion manufaturing

      1. Avatar
        Vaibhav Sankhe

        Dear Sridhar,

        You can contact me on +91-9022533303 for after shave lotion

  3. Pingback:Cosmetic Cream | Cosmetics

  4. Pingback:Will Mouthwash Soaks Save Your Dry, Cracked Feet? - FutureDerm

  5. Avatar
    abdullah sheikh

    Sir plz give shaving cream formula

    1. Avatar
      Perry Romanowski

      The formula is in the post above.

  6. Avatar

    Sir plz send me shaving foam formula and processor on my email id because above detail is not clear, plz send me soon

    1. Avatar
      Satyender Yadav.

      Sir plz send me shaving foam formula and processor on my email id because above detail is not clear, plz send me soon

  7. Avatar

    Wow, Perry. I can’t believe the ‘chemical engineers’ that want you to do their jobs for them. I’m honestly floored. I didn’t notice any of them offering you a corresponding portion of their salaries.

    1. Avatar
      Perry Romanowski

      lol. Well, it doesn’t cost anything to ask. I’m just appreciative that people visit the website and I help however I can.

  8. Avatar
    Danish chauhan

    Plz tell me about shaving cream formula

    1. Avatar
      Perry Romanowski

      See the post above.

      1. Avatar
        Lisa S

        Your patience and diplomatic attitude are so admirable right now!

  9. Avatar
    Cathy v

    Can you help with the amt of g needed of koh to react with 8g of stearic acid?

    1. Avatar
      Ajay Patel

      1.68 mg.

  10. Avatar
    Muhammad Abid

    Dear Perry,
    I am a Chemical Engineer and want to prepare “Hair Removal Cream” (Depilatory).
    Kindly help to get formula & method to prepare it.
    Waiting for your kind response.
    Best regards,

    1. Avatar
      Perry Romanowski

      I’d suggest you look through our post on where to find free cosmetic formulas

  11. Avatar

    Dear Perry ,
    I am a chemist eng. I work as r&d chemist in cosmetics co.
    Pls I need your help for the formulation of hand wash in creamy form .
    I try and make more than formula but I need to increase the foaming because our customer needs more foaming in hand liquid soap.
    Waiting for you reply as soon as

  12. Avatar

    hello sir,
    im chemist,
    i want to made shaving cream small unit so pls suggest me, how can i do .pls send me lab testing proseger,manufacturing ,contant,scal,etc…

  13. Pingback:Les savons à barbe sont-ils rasoirs ? | Le blog de La Cheveche

  14. Avatar

    dear sir / madam
    pls email me about details of “learning cream hair colors ”
    i wanna learn cream hair color chemist course pls send me details
    i look forward to receiving your all courses details , and if you have books and dvds pls send me details
    thank you

  15. Avatar
    sabah obaidi

    Can you please suggest a starting formula for hair removing cream
    with moisturiser

    1. Avatar
      Perry Romanowski

      Look through the sources on our “free starting formulation” page.

      1. Avatar

        i want to know the formula of shaving foam with complete procedur ,will you help me , plz reply

        1. Avatar
          Perry Romanowski

          See the post above

  16. Avatar


    I need your help. in my shaving cream formulation, we found there is little more gumming and little less viscous and less softness as compare to standard. How to avoid these problems .? Suggest me…

  17. Avatar
    Samrand Hassanzadeh

    Regards .
    I am a chemical engineer with experience in manufacturing cleaning and detergents products.Now I am also launched a line of cosmetics.I want you learn to me how making cosmetics products along their formulations for manufacturing these materials in the our industry.
    I am waiting for your response.
    Great thanks.
    Samrand Hassanzadeh

  18. Avatar

    Dear perry,
    Thanks a lot for the information, I want to make soap paste but I could not, can you help me.

    1. Avatar

      Hello – see our article on where to find free cosmetic formulas. You might find one there.

  19. Avatar
    vijoy pratap tewary

    i want to open my own saving cream manufacturing industry. please give me following information:
    1.formulation with industrial methods of preperation
    2. tests for saving cream
    3.machines for industry
    4.books for it

  20. Avatar

    Dear Perry,

    Thanks a lot for the information, it is really useful, can you help me now? by the way, do you have information about the manufacturing process of a shaving foam?

    Thanks again

    Best Regards

  21. Avatar

    if you want to become a practical formulator of top industries including cosmetic ,soap industry and many more formulation then visit at
    Here is a simple formulation of shaving cream with its simple procedure.
    Stearic acid = 30.00%
    Coconut oil = 10.00%
    Palm Oil = 5.00%
    Caustic pottash = 7.00%
    Soda caustic = 1.50%
    Glycerine = 10.00%
    water = 36.50%

    Part (A) and Part ( B) separately Heated in the vessels at 75 centigrade temp
    After this mix both parts till it become homogeneously.
    Add the perfume in the end at 35 centigrade.
    It is a simple formulation which raw material easily available in the market.

    1. Avatar

      Dear Sir
      can your share the Formulation for Aerosol Shaving Foam.

  22. Avatar

    It is the industrial formulation of shaving cream with the help of it you can make your business.
    Stearic acid=38.80 parts
    Coconut oil=9.70 parts
    potassium hydroxide=8.00 parts
    Sodium Hydroxide=1.60 parts
    Glycerol=11.60 parts
    Water=30.30 parts
    Methylparaben=0.10 parts
    perfume=0.25 parts

    1. Avatar
      virendra Kumar Tiwari


  23. Avatar

    Dear Perry,
    Great works !!!
    By the way, can you help me with the basic formulations of hair color products (including Color cream, Cream developer and Post-coloration treatment and/or Pre-coloration treatment)
    I’m working on a project to develop those products (a hair color kit used at-home and/or beauty salon, like the L’oréal Paris Récital Préférence Hair Color Kit)
    Thank you very much, have a nice day

  24. Avatar

    I make a olive oil soap using only olive oil, water, and NaOH. I was surprised to find out that many of my customers inform me that they use this soap to shave (beards) and wash their hair. Is this a good thing.

    1. Avatar

      It’s a fine enough thing to do. It will not be as good as a standard shaving cream but anything that gives you some slip is better than water alone.

      1. Avatar
        Shahid Abbas

        Respected all,I am chemical engineer i want to manufacture hair hold spray on industriale scale.Please tell me about ingreidients,formulation,lab testing appratus and machinery.

Leave a Reply to Perry Romanowski Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.