Surface Cleanser with disinfectant formula

Tagged: surface-cleaner-disinfectant-benzalkonium-ipa-water

Formulating

Surface Cleanser with disinfectant formula

Posted by bahey on August 4, 2019 at 2:21 am

Hello everyone,
i am working on formula of surface cleaner with disinfectant , but i have found that it’s not good in cleaning specially laminated surfaces and glasses and remain with some residuals
, any suggestions?

formula
Benzalkonium chloride 0.13 %
tween 80. 1%
Sles. 2%
fragrance. ( oily ) 1%
Ipa. 8%
water. Up to 100%

Any suggests ? Does the oil perfume cause this turbidity?

Many thanks

bahey replied 5 years, 4 months ago 5 Members · 11 Replies
- surface-cleaner-disinfectant-benzalkonium-ipa-water
11 Replies

Chemist77

Member
August 4, 2019 at 4:41 am

Remove SLES, use a nonionic surfactant like a glucoside. Use chelants like EDTA or GLDA, check Akzo as well. They have Berols which are extremely effective in such applications. Acusol PRO from Dow as well is another versatile product. Dowanol solvents are also common in such products.
You cannot use SLES with a cationic quat for obvious reasons.
bahey

Member
August 4, 2019 at 6:17 am

Chemist77 said:

Remove SLES, use a nonionic surfactant like a glucoside. Use chelants like EDTA or GLDA, check Akzo as well. They have Berols which are extremely effective in such applications. Acusol PRO from Dow as well is another versatile product. Dowanol solvents are also common in such products.
You cannot use SLES with a cationic quat for obvious reasons.

Many thanks for your immediate help ❤️
bahey

Member
August 4, 2019 at 7:19 am

Chemist77 said:

Remove SLES, use a nonionic surfactant like a glucoside. Use chelants like EDTA or GLDA, check Akzo as well. They have Berols which are extremely effective in such applications. Acusol PRO from Dow as well is another versatile product. Dowanol solvents are also common in such products.
You cannot use SLES with a cationic quat for obvious reasons.

Do you suggest me a simple formula ?
please consider, Whate type of perfume should i use with its emulsifiers?
thank again
Pharma

Member
August 4, 2019 at 5:51 pm

Why 8% IPA?

Benzalkolium leaves a slippery film on surfaces. Personally, I don’t like that: using it to clean the shower and don’t tell your wife -> someone is going to die today .

BTW is your product meant to be used pure or diluted?
amitvedakar

Member
August 5, 2019 at 4:24 am

What about following Materials?

Triclosan, Chlorhexidine Gluconate Soln. or Cetrimide

I don’t know above are useful or not?
Gunther

Member
August 5, 2019 at 4:00 pm

bahey said:

Hello everyone,
i am working on formula of surface cleaner with disinfectant , but i have found that it’s not good in cleaning specially laminated surfaces and glasses and remain with some residuals
, any suggestions?

formula
Benzalkonium chloride 0.13 %
tween 80. 1%
Sles. 2%
fragrance. ( oily ) 1%
Ipa. 8%
water. Up to 100%

Any suggests ? Does the oil perfume cause this turbidity?

Many thanks

Anionics like SLES aren’t compatible with quaternary ammonium cationics (benzalconium) as previously stated.

You can try using some ethoxylated alcohol both as as a surfactant, and to solubilize fragrance, hopefully doing away with Tween.

Consider ethanol. While IPA degreases better, it also smells worse than ethyl alcohol does.
bahey

Member
August 6, 2019 at 7:46 am

Pharma said:

Why 8% IPA?

Benzalkolium leaves a slippery film on surfaces. Personally, I don’t like that: using it to clean the shower and don’t tell your wife -> someone is going to die today .

BTW is your product meant to be used pure or diluted?

My product is ready to use directly ( diluted)
used as hard surfaces and tools disinfectant mostly in. Barber shops
used
bahey

Member
August 6, 2019 at 7:48 am

Gunther said:

bahey said:

Hello everyone,
i am working on formula of surface cleaner with disinfectant , but i have found that it’s not good in cleaning specially laminated surfaces and glasses and remain with some residuals
, any suggestions?

formula
Benzalkonium chloride 0.13 %
tween 80. 1%
Sles. 2%
fragrance. ( oily ) 1%
Ipa. 8%
water. Up to 100%

Any suggests ? Does the oil perfume cause this turbidity?

Many thanks

Anionics like SLES aren’t compatible with quaternary ammonium cationics (benzalconium) as previously stated.

You can try using some ethoxylated alcohol both as as a surfactant, and to solubilize fragrance, hopefully doing away with Tween.

Consider ethanol. While IPA degreases better, it also smells worse than ethyl alcohol does.

Many thanks Gunther for your support.
how many should i add from ethoxylated alcohol ( % ) ?
Pharma

Member
August 6, 2019 at 5:55 pm

The label reads “Alcohol Free Disinfectant Spray” and contains isopropanol… great marketing! It’s likely added for reduced surface tension and somewhat to boost antimicrobial efficacy of the quat. I wouldn’t hesitate to use a higher % IPA unless flammability is of great concern.

Furthermore, it states “Literally Spray & Go” but for that, given it’s used on utensils which shouldn’t be slippery, me personally, I wouldn’t use a quat in there.

I think the advice of @Gunther to use an ethoxylated surfactant instead of SLES is a very good one.

Since the spray will be in contact with plastic parts such as soft handles, I’d use a lot less fragrance since that one can “wear them out”, making them brittle or gluey/sticky.
Gunther

Member
August 7, 2019 at 1:47 am

bahey said:

Gunther said:

bahey said:

Hello everyone,
i am working on formula of surface cleaner with disinfectant , but i have found that it’s not good in cleaning specially laminated surfaces and glasses and remain with some residuals
, any suggestions?

formula
Benzalkonium chloride 0.13 %
tween 80. 1%
Sles. 2%
fragrance. ( oily ) 1%
Ipa. 8%
water. Up to 100%

Any suggests ? Does the oil perfume cause this turbidity?

Many thanks

Anionics like SLES aren’t compatible with quaternary ammonium cationics (benzalconium) as previously stated.

You can try using some ethoxylated alcohol both as as a surfactant, and to solubilize fragrance, hopefully doing away with Tween.

Consider ethanol. While IPA degreases better, it also smells worse than ethyl alcohol does.

Many thanks Gunther for your support.
how many should i add from ethoxylated alcohol ( % ) ?

You should definitely try different amounts yourself to see which one you like better.

While something like 2-3% will clean and foam better, it might leave a soapy residue if it’s not rinsed off.
If it does you’ll need < 1%.
bahey

Member
August 10, 2019 at 11:46 am

Pharma said:

The label reads “Alcohol Free Disinfectant Spray” and contains isopropanol… great marketing! It’s likely added for reduced surface tension and somewhat to boost antimicrobial efficacy of the quat. I wouldn’t hesitate to use a higher % IPA unless flammability is of great concern.

Furthermore, it states “Literally Spray & Go” but for that, given it’s used on utensils which shouldn’t be slippery, me personally, I wouldn’t use a quat in there.

I think the advice of @Gunther to use an ethoxylated surfactant instead of SLES is a very good one.

Since the spray will be in contact with plastic parts such as soft handles, I’d use a lot less fragrance since that one can “wear them out”, making them brittle or gluey/sticky.

Thanks pharma for your comments,
but this label is an old label with different ingredients, i use it only to show how the product offered

many thanks again