[NILDACOSTA26]

OK. Thanks again.

Sr ,you really helped me very much! 

[NILDACOSTA26]

Dear Mr  David. Thank you very much for your help!! Very Kind.

In my country  don’t find coconut fatty acids. Can I keep the Babassu oil or Coconut Oil in the same quantities?

[NILDACOSTA26]

My Formulation Wasn’t white, got a little transparent. Does anyone know why?
Best Regards,

[NILDACOSTA26]

Hello Dear, thanks. I tried with Babassu oil, but it’s no good. It doesn’t make a lot of foam.

Do I need to increase the estearic acid? Can you help me.

I tried to get on the internet, but they do not speak a value, just 10 to 30 % of stearic acid. Wasn’t white, got a little transparent

My Formulation is:

stearci acid - 7,50 %
Miristic Acid - 11,50%
Babassu OIl -9,5%
Glicerin - 5%
KOH - 5,30%
NaOH - 0,30%
triethanolamine -1%
water - qsp

Sodium Lauroyl
Sarcosinate………………………..    
3,00

fragrance

 

[NILDACOSTA26]

Dear Belassi,I can’t thank you enough. Thank you very much for your help. I’m going to make the samples. 

[NILDACOSTA26]

Dear David,
Thank you very much. I’m going to do a search. I appreciate your opinion.

[NILDACOSTA26]

Dear Mark, thanks for replying. I’m trying to reproduce a formulation of Croda. I researched and bought some shaving creams, Taylor, Proraso. … and all use 

at least the NaOH and KOH. The creams are great. 

Taylor use Triethanolamine too  and Proraso Acid Lacit.
About 3% You say reduce the stearic acid? of 7.5% to 3%?

but then I won’t know calculate as KOH and NaOH used.
About coconut oil and Coconut acid, yes if possible to buy too. 

[NILDACOSTA26]

Dear David08848 . Stearic Acid 7,5 % - i used.

[NILDACOSTA26]

Dear Belassi, I measured again today the PH, I made the sample on Wednesday. and this in 10

[NILDACOSTA26]

Dear Belassi, I took the formula menthol, Luryl Sulphate, Crodalan, Crodapearl,
and Dietanolamide. I will make like shave cream Taylor Old Bond. 

I read that you have a lot of experience … Thank you for helping me.

Do you think I change the oil of Babassu Coconut for coconut acid? 

If Yes, could you indicate the% of coconut acid?

[NILDACOSTA26]

Dear Belassi, thanks for help me. I’m sorry, i I wrote wrong. I used
5,30 %  KOH and 0,30% NaOH. I cooked it for 1 hour.  

[NILDACOSTA26]

Dear Johnb, yes i used Orbignya Oleifera Seed Oil (Babassu oil). 
0,30% NaOH and 5,30% KOH. I cooked it for 1 hour. I increased to 12% oil and lower in the water? 
Thanks you very much for tray help me.

[NILDACOSTA26]

Sorry, NAoh 0,30%  not 5,30%. This formula is Croda in this : i used 0,30% 

Shave cream formula

About oil is Babassu - Orbignya Oleifera Seed Oil 

[NILDACOSTA26]

Thank you Mr John!

[NILDACOSTA26]

Dear Perry, I’m not discouraged. On the contrary, the difficulty is what motivates. Because I know that in some

place or someone will give me a solution. Just look.

[NILDACOSTA26]

Dear John, in my country no one specialist shaving soap fabric. I contact any, but not. 

i have SOAP bar extruder, I buy noodle for toilet SOAP, but no industry produces the noodle to shaving soap, where it is easily found

like France, England, Germany and others.  Thanks for replying!

[NILDACOSTA26]

Dear Bob, I sought and found  Stearic Acid C18 98/100 - vegetable (Palm Oil).
do you think I produce with this acid will have final product better? 
best Regads, NP

[NILDACOSTA26]

Dear Bob, thanks for help me too. Please, I know these:
Stearic Acid vegetable, Double and triple pressure. Can you suggest any known brand that sells the good stearic acid  Basf, Lubrizol, ….?
Thanks for caring about my question! .

I’ll aproveitr your time a little to ask a question.

You know inform where I find formula of shaving soap ( comercial type) bar with ingredients: 

Sodium Tallowate, Potassium Stearate, Sodium Cocoate, Sodium Stearate, Aqua, Potassium Cocoate, Glycerin, Parfum, Alpha-Isomethyl Ionone, Hexyl Cinnamal, Limonene, Linalool, Hydroxycitronellal, Lanolin, Titanium Dioxide, Sodium Chloride, Sodium Gluconate, Sodium Silicate, Tetrasodium EDTA, Magnesium Sulphate, Tetrasodium Etidronate

[NILDACOSTA26]

Thank you sr. for help me!!

[NILDACOSTA26]

Mr John, i will make again with 0,5% Potassium hydroxide and 15% stearic acid
por jars cream. Do you think 0,5% is is much  Potassium by your great experience? ?  Best Regards NP

[NILDACOSTA26]

[NILDACOSTA26]

Dear Mr John, thank you again and thanks for giving a little of your time

You can, please help me just a little more?

The cream that bought the Proraso (PRE SHAVE CREAM) has a Pearlescent appearance,

but the formula has nothing showing. Why does he keep looking like this?  What percentage of soda I can use in this type of cream? 
Best Regards, Nilda Potter.

[NILDACOSTA26]

Hello, thank you very much for help me.
I used this formulation.  Best Regards,   

Stearic Acid	12.5
Cetyl alcohol	1
Glycerol	6
Potassium hydroxide	1
Propyl Paraben	0.025
Methyl Paraben	0.05
Mento/canfhor…
Purified water	29.34