Fekher
Forum Replies Created
-
@will from the lol i will say that your oil phase seems to 100 % solids and that’s almost will give a bad resultas ( may it is the reason of white trace) , so try to find the best proportion between solid and liquid ( in oil phase ) , and for Acudyne 1000’s fixation i guess it is not about ph but almost adding oil phase to water phase will decrease the fixation effect so to lower oil level the better fixation effect.
From your lol i can see that you are doing good that’s why i’am ready for help,have nice work.
-
@crillz with adequat level of oils and beewax clay won’t sink to the bottom .
However if it is hair clay pomade, not mask i did not think that Rhassoul clay is a good idea . -
@Will give full Lol for better advices , but generally i can see a lot of corrections that can be done , it depends on the lol and the desired product .
-
@nielrobertlim try cathon CG may it works .
-
@yash42440 you are welcome .
-
@Bill_Toge thanks for answer about viscosity i want have medium viscosity comparing to industriel liquid soap and the grade in my country the industriel name is called detergel .
-
@jessah i got an idea making 40% salicylic aid product but it is not gel neither lotion so it dosen’t work with you such idea .
-
@jessah you must use 40% salicylic aid in gel form?
-
@marinaartm make research how to calculate required hlb and you said oils:15,5% however level you gave in last comment equal to 8% .
-
@marinaartm it seems o/w emulsion so you must calculate the required hlb (it depends of wich oils and their levels ) then you use adequat emulsifiers for required hlb.
-
@mhart123 try HEC
-
@pras i think that liqiud soap can be good solution for your need .
-
@Belassi try hot process it will almost give better resultats .
-
@Gordana you are welcome .
-
@Gordana actually cetyl alcohol and cetyl palmitate are not emulsifiers they are just oil ingredients , and as i guess it is w/o cream so glyceryl stearate by it self can lead for that type of emulsion .
Geogard 221 is good idea i guess. -
@Yasmine i’am also trying beewax in emulsion and i got verry acceptable texture ,i guess the problem is from formulation not ingredients so for cream i’am sure to have w/o cream beewax can be good solution may in lotion is not, however in case of sunscreen cream is a good idea.
Second thing for suspension zinc oxide or titanuim you can do it in oil pomade and you will get verry lovely texture without the need of emulsion so you will be more sure about product’s stability . -
@tanelise actually i had not borax however i tried NaOh with beewax and i got very stable emulsion , but i’am sure that it works also with borax .
The reason i go for borax that it is milder base comparing to Naoh and even the origin lol with with borax i was obliged to try it with NaOh because i did not find borax . Give the Lol and i will check it for giving advice . -
@Muhammadluqman914 it will be always for better advice giving lol.
and for general answer almost it will works HEC . -
@Yasmine actually beewax with borax gives very stable w/o emulsion .
-
@Muhammadluqman914 give the lol to have better help .
-
@Gordana may be glycerin and stearic acid are used as glyceryl stearate wich is an emulsifier .
-
@bekas as a solubliser peg 40 is used 3:1 so for your case i guess 4,5% will be good.
-
@AbdulRahim i made a lot of experiences using CAPB and i’am sure that if it is good quality it will never cause cloudy effect , so you just need to verify if it is really from CAPB . If it is , so the problem is the quality of it not CAPB by it-self .
-
@Pharma actually i asked for that to get others better ideas then mine , and that’s what you gave me . from your ideas i saw the weakness of mine , so now i’am not motiveted to do the experience but may later i will do it to see the quality of such soap .