Home Cosmetic Science Talk Formulating SHAVE CREAM

Tagged: 

  • belassi

    Member
    January 13, 2018 at 4:55 pm

    coconut oil.

  • NILDACOSTA26

    Member
    January 16, 2018 at 9:01 pm

    Hello Dear, thanks. I tried with Babassu oil, but it’s no good. It doesn’t make a lot of foam.

    Do I need to increase the estearic acid? Can you help me.

    I tried to get on the internet, but they do not speak a value, just 10 to 30 % of stearic acid. Wasn’t white, got a little transparent

    My Formulation is:

    stearci acid - 7,50 %
    Miristic Acid - 11,50%
    Babassu OIl -9,5%
    Glicerin - 5%
    KOH - 5,30%
    NaOH - 0,30%
    triethanolamine -1%
    water - qsp

    Sodium Lauroyl
    Sarcosinate………………………..    
    3,00

    fragrance

     

  • NILDACOSTA26

    Member
    January 16, 2018 at 9:07 pm

    My Formulation Wasn’t white, got a little transparent. Does anyone know why?
    Best Regards,

  • David08848

    Member
    January 17, 2018 at 1:30 pm

    Your Stearic Acid content it not high enough.  Your Babassu (similar to Coconut Oil and used for lather) is too high and so is your Myristic Acid.  Basically, your ingredients aren’t too bad but the amounts aren’t in the right ranges for each.

  • David08848

    Member
    January 17, 2018 at 1:49 pm

    Here is a formula that was posted here by a gentleman named “pepe”.  The numbers are pretty good:

    Here is the Formula from my notes;

    Water                                           48.100%

    Pristerene 4908-stearic acid         21.300%

    Emery 655 myristic acid               10.400%

    Emery 622 coconut fatty acids      4.800%

    Glycerine                                      6.200%                                             

    Unichem SOHYD                            0.600%                                             

    Unichem POHYD                            6.800%                                                              

    TEA                                              1.500%

    Propylparaben                               0.200%
                                    

    Methylparaben                              0.100%

  • NILDACOSTA26

    Member
    January 17, 2018 at 4:19 pm
    Dear Mr  David. Thank you very much for your help!! Very Kind.
    In my country  don’t find coconut fatty acids. Can I keep the Babassu oil or Coconut Oil in the same quantities?
  • David08848

    Member
    January 17, 2018 at 5:23 pm

    Yes, you can substitute the Babassu or Coconut Oil in the 4.5 to 5% range  for the Coconut Fatty Acids (4.8% in this formula).  You really only need to lower the Myristic Acid 1% or 2% to get into the range in this formula.  The biggest change will be the Stearic Acid which is about a third of what it should be.  That is a major reason your results are clear and not white!

  • NILDACOSTA26

    Member
    January 17, 2018 at 8:04 pm
    OK. Thanks again.
    Sr ,you really helped me very much! 

Log in to reply.

Chemists Corner