Improving lotion flow and gentleness

Tagged: ingredients, lotion, moisturizer, viscosity

Formulating

Improving lotion flow and gentleness

Posted by lwere on October 20, 2021 at 4:40 pm

Hi, everyone. I made an emulsion using water, mineral oil, Stearic acid, cetearyl alcohol, glycerine, sodium lactate, butylene glycol, propylene glycol, Triethanolamine, sorbitol, dimethicone, isopropyl myristate, petroleum jelly, Carbomer and Euxyl K712. When I used the mixer after heating the phases it curdled…water at the bottom. I continued to mix it manually using a spatula and somehow with that, as it cooled, it came together. The curdling/ separation has never happened for me before. What could have been the cause?

My eyes also seem to be sensitive to it…when I sniff it I get the same sensation as I do from menthol. What could the reason be?

The ingredients I haven’t used in an emulsion before here are the sodium lactate (2.5%), butylene glycol (1%)and sorbitol (1%).

Any similar experiences? Tips?

Also, what can I do to make my emulsion flow easily out of the bottle. It is meant to be a lotion but is too thick. My water % is 79.

lwere replied 3 years, 1 month ago 5 Members · 19 Replies
19 Replies

Paprik

Member
October 20, 2021 at 6:00 pm

Hello Iwere,

you would need to provide full formula with %, so we can review the inputs. Imagine making a special soup where you know only the ingredient, but no the amounts and method.
lwere

Member
October 20, 2021 at 6:54 pm

???? Sure. Here goes:
water 78.45%
mineral oil - 4%
Stearic acid - 2%
cetearyl alcohol - 1%
glycerine - 2.5%
sodium lactate - 2.5%
butylene glycol - 1%
propylene glycol - 0.8%

Glyceryl monostearate - 2%

IPM - 1%
Triethanolamine - 0.5%

sorbitol - 1%
dimethicone - 1%

isopropyl myristate - 1%

petroleum jelly - 0.5%

Cera microcrystallina- 0.5%

DiSodium EDTA - 0.25%

Carbomer - 0.05%
Potassium sorbate - 0.1%
sodium benzoate - 0.2%

Fragrance - 0.8%
Graillotion

Member
October 20, 2021 at 7:38 pm

You can drop the carbomer, as the sodium lactate will probably negate that, and it won’t do anything at that rate. You need a more functional/robust emulsification program.
lwere

Member
October 20, 2021 at 8:24 pm

Graillotion said:

You can drop the carbomer, as the sodium lactate will probably negate that, and it won’t do anything at that rate. You need a more functional/robust emulsification program.

Thanks. Will dropping the Carbomer make the emulsion less stable? Is this with respect to the temporary curdling or with respect to removing a now unnecessary ingredient?

The addition of the sodium lactate was to create a feel that is better than just glycerine. Would keeping the Carbomer and dropping the sodium lactate and using 5% glycerine make for a more stable emulsion?

I normally make the lotion without the sodium lactate or sorbitol or butylene glycol and it turns out okay. I found that this particular formulation dried faster and seemed less greasy and didn’t make users sweat, even in humid areas.

Any ideas on which of these 3 ingredients could be slightly sensitizing?

What would you suggest for a more robust emulsification system?
Abdullah

Member
October 21, 2021 at 1:13 am

What is the pH?
Which viscosity dimethicone?

As Graillotion said, use a proper emulsifier and remove carbomer if you want to use sodium lactate. Use xanthan gum instead.

Use a proper preservative

Reduce the fragrance to 0.1%

Maybe reduce EDTA too a bit
lwere

Member
October 21, 2021 at 4:30 am

Abdullah said:

What is the pH?
Which viscosity dimethicone?

As Graillotion said, use a proper emulsifier and remove carbomer if you want to use sodium lactate. Use xanthan gum instead.

Use a proper preservative

Reduce the fragrance to 0.1%

Maybe reduce EDTA too a bit

Thanks for your response. I used Dimethicone 350.
What emulsifier would you switch out the GMS and CSA for?
Abdullah

Member
October 21, 2021 at 1:18 pm

In anionics i like sodium stearoyl lactylate.
Paprik

Member
October 21, 2021 at 9:22 pm

Ok, first let me organize the formula

water 78.45%
Carbomer - 0.05%
Triethanolamine - 0.5%
glycerine - 2.5%
sorbitol - 1%
sodium lactate - 2.5%
butylene glycol - 1%
propylene glycol - 0.8%
DiSodium EDTA - 0.25%

mineral oil - 4%
dimethicone - 1%
IPM - 1%
isopropyl myristate - 1%

petroleum jelly - 0.5%
Cera microcrystallina- 0.5%

Stearic acid - 2%
cetearyl alcohol - 1%
Glyceryl monostearate - 2%

Potassium sorbate - 0.1%
sodium benzoate - 0.2%

Fragrance - 0.8%

You have 5 humectants, why? Is it for marketing? If so, put them at 0.1% and choose 1-2 to be the main ones. Glycerin and Sodium Lactate for example.

I believe you have way too much Triethanolamine to neutralize the Carbomer.
The ratio is 1.0-1.5 : 1.0 - TEA : Carbomer. Keep in mind you cannot adjust the final pH anymore. Also, as mentioned, the sodium lactate is most likely making the carbomer useless.
Better pick some other rheology modifier to make it easier for you. Xanthan Gum is perfect choice. Natural, easy to slurry with all those humectants, bang bang boom.

Ok, oil phase.
IPM should stand for isopropyl myristate. Is it doubled then?
Stearic acid is an anionic emulsifier. Has a strong charge (also affected by Sodium lactate as it’s an electrolyte), so you might want to re-think that and use higher portion of non-ionic high HLB waxy BLEND emulsifier.
Glyceryl monostearate is low HLB emulsifier - preferably suits W/O emulsion. Or it can help with rubbing time and viscosity, however as you are using Dimethicone, that won’t be your issue. You can get rid of it.
So looking over the formula, you have one anionic emulsifier, one W/O emulsifier and a bit of thickener/co-emulsifier. That is why people didn’t like it.
The W/O emulsifier would most likely destabilize you formula.

The 0.8% fragrance is making me dizzy Typical fragrances input for facial product is 0.2%. For me, sometimes even 0.1% is too much. That’s where, most likely, the irritation comes from.

!!!!! Also, those preservatives can be also irritating. And they work ONLY in lower pH. According to your TEA input, I’m pretty sure you have not reached this and bang, you have contamination/microbial growth!!! . Use some Euxyl PE 9010 or similar. !!!!!

Ok, I think I’m done
lwere

Member
October 22, 2021 at 4:45 am

Paprik said:

Ok, first let me organize the formula

water 78.45%
Carbomer - 0.05%
Triethanolamine - 0.5%
glycerine - 2.5%
sorbitol - 1%
sodium lactate - 2.5%
butylene glycol - 1%
propylene glycol - 0.8%
DiSodium EDTA - 0.25%

mineral oil - 4%
dimethicone - 1%
IPM - 1%
isopropyl myristate - 1%

petroleum jelly - 0.5%
Cera microcrystallina- 0.5%

Stearic acid - 2%
cetearyl alcohol - 1%
Glyceryl monostearate - 2%

Potassium sorbate - 0.1%
sodium benzoate - 0.2%

Fragrance - 0.8%

You have 5 humectants, why? Is it for marketing? If so, put them at 0.1% and choose 1-2 to be the main ones. Glycerin and Sodium Lactate for example.

I believe you have way too much Triethanolamine to neutralize the Carbomer.
The ratio is 1.0-1.5 : 1.0 - TEA : Carbomer. Keep in mind you cannot adjust the final pH anymore. Also, as mentioned, the sodium lactate is most likely making the carbomer useless.
Better pick some other rheology modifier to make it easier for you. Xanthan Gum is perfect choice. Natural, easy to slurry with all those humectants, bang bang boom.

Ok, oil phase.
IPM should stand for isopropyl myristate. Is it doubled then?
Stearic acid is an anionic emulsifier. Has a strong charge (also affected by Sodium lactate as it’s an electrolyte), so you might want to re-think that and use higher portion of non-ionic high HLB waxy BLEND emulsifier.
Glyceryl monostearate is low HLB emulsifier - preferably suits W/O emulsion. Or it can help with rubbing time and viscosity, however as you are using Dimethicone, that won’t be your issue. You can get rid of it.
So looking over the formula, you have one anionic emulsifier, one W/O emulsifier and a bit of thickener/co-emulsifier. That is why people didn’t like it.
The W/O emulsifier would most likely destabilize you formula.

The 0.8% fragrance is making me dizzy Typical fragrances input for facial product is 0.2%. For me, sometimes even 0.1% is too much. That’s where, most likely, the irritation comes from.

!!!!! Also, those preservatives can be also irritating. And they work ONLY in lower pH. According to your TEA input, I’m pretty sure you have not reached this and bang, you have contamination/microbial growth!!! . Use some Euxyl PE 9010 or similar. !!!!!

Ok, I think I’m done

Thanks for this very comprehensive and useful response. Lots for me to consider.

I will consider the xanthan gum…would using it as a substitute get rid of the necessity of using the TEA?

On the preservative, I’m avoiding formaldehyde releasers and parabens. The phenoxyethanol, apart from the expense, seems to be a sensitizer for our skin. So is benzyl alcohol, which triggers eczema in our family. I’m trying hurdle technology in view of the rather numerous preference and sensitization issues.

On fragrance…my users were unhappy with my initial 0.5% so I increased the amount. Fancy that.
lwere

Member
October 22, 2021 at 5:05 am

Why does the lotion not flow despite the high water amount? It takes on the consistency of a cream and is therefore difficult to get out of the bottle.
Graillotion

Member
October 22, 2021 at 5:18 am

Viscosity and water inclusion rate…have little relevance. I’ve only ever seen that discussed on mommy blogger sites.

It is all about the thickeners.

I can make something that looks like a solid…with 99.2% water. Hehehe…just experiment with polymeric emulsifiers.
Abdullah

Member
October 22, 2021 at 6:49 am

Have you purchased or used phenoxyethanol?
It is one of the least expensive and mildest preservatives. Is is milder than benzyl alcohol, sodium benzoate and potassium sorbate.

With xanthan gum you don’t need tea.

Is this product for sale or your own use?
You can use Paraben. It is non irritant or the year 2019 preservative. I think most people don’t care about it as big companies like Cerave is using it.
lwere

Member
October 22, 2021 at 11:48 am

Graillotion said:

Viscosity and water inclusion rate…have little relevance. I’ve only ever seen that discussed on mommy blogger sites.

It is all about the thickeners.

I can make something that looks like a solid…with 99.2% water. Hehehe…just experiment with polymeric emulsifiers.

Mommy blogger sites…????.

So then I need help with that. What % of the thickeners should I use for my particular formula?
lwere

Member
October 22, 2021 at 11:52 am

Abdullah said:

Have you purchased or used phenoxyethanol?
It is one of the least expensive and mildest preservatives. Is is milder than benzyl alcohol, sodium benzoate and potassium sorbate.

With xanthan gum you don’t need tea.

Is this product for sale or your own use?
You can use Paraben. It is non irritant or the year 2019 preservative. I think most people don’t care about it as big companies like Cerave is using it.

Thanks.

Yes, I have phenoxyethanol, hence the feedback on reaction. In my country it is a lot more expensive than the ones I’m using. Parabens have been demonized here…it is the one thing they look out for.

The product is for sale.
PhilGeis

Member
October 22, 2021 at 11:55 am

The organic acids you’re using are pretty poor by themselves..
lwere

Member
October 22, 2021 at 3:22 pm

PhilGeis said:

The organic acids you’re using are pretty poor by themselves..

Thanks, PhilGeis. Care to be more specific?
Graillotion

Member
October 22, 2021 at 10:01 pm

lwere said:

Graillotion said:

Viscosity and water inclusion rate…have little relevance. I’ve only ever seen that discussed on mommy blogger sites.

It is all about the thickeners.

I can make something that looks like a solid…with 99.2% water. Hehehe…just experiment with polymeric emulsifiers.

Mommy blogger sites…????.

So then I need help with that. What % of the thickeners should I use for my particular formula?

This is where trial and error comes in….Just keep remaking the formula, reducing your thickeners each time…until it is too thin….then bump them back up. (Start with the stearic).

Thickeners will always be formula specific….so the correct answer will be the one I always get from my mentor….’DEPENDS’… There is no set format. Just what works.

Aloha.
lwere

Member
October 23, 2021 at 2:59 pm

Graillotion said:

lwere said:

Graillotion said:

Viscosity and water inclusion rate…have little relevance. I’ve only ever seen that discussed on mommy blogger sites.

It is all about the thickeners.

I can make something that looks like a solid…with 99.2% water. Hehehe…just experiment with polymeric emulsifiers.

Mommy blogger sites…????.

So then I need help with that. What % of the thickeners should I use for my particular formula?

This is where trial and error comes in….Just keep remaking the formula, reducing your thickeners each time…until it is too thin….then bump them back up. (Start with the stearic).

Thickeners will always be formula specific….so the correct answer will be the one I always get from my mentor….’DEPENDS’… There is no set format. Just what works.

Aloha.

Thanks. Very helpful.
lwere

Member
October 25, 2021 at 2:07 pm

Paprik said:

Ok, first let me organize the formula

water 78.45%
Carbomer - 0.05%
Triethanolamine - 0.5%
glycerine - 2.5%
sorbitol - 1%
sodium lactate - 2.5%
butylene glycol - 1%
propylene glycol - 0.8%
DiSodium EDTA - 0.25%

mineral oil - 4%
dimethicone - 1%
IPM - 1%
isopropyl myristate - 1%

petroleum jelly - 0.5%
Cera microcrystallina- 0.5%

Stearic acid - 2%
cetearyl alcohol - 1%
Glyceryl monostearate - 2%

Potassium sorbate - 0.1%
sodium benzoate - 0.2%

Fragrance - 0.8%

You have 5 humectants, why? Is it for marketing? If so, put them at 0.1% and choose 1-2 to be the main ones. Glycerin and Sodium Lactate for example.

I believe you have way too much Triethanolamine to neutralize the Carbomer.
The ratio is 1.0-1.5 : 1.0 - TEA : Carbomer. Keep in mind you cannot adjust the final pH anymore. Also, as mentioned, the sodium lactate is most likely making the carbomer useless.
Better pick some other rheology modifier to make it easier for you. Xanthan Gum is perfect choice. Natural, easy to slurry with all those humectants, bang bang boom.

Ok, oil phase.
IPM should stand for isopropyl myristate. Is it doubled then?
Stearic acid is an anionic emulsifier. Has a strong charge (also affected by Sodium lactate as it’s an electrolyte), so you might want to re-think that and use higher portion of non-ionic high HLB waxy BLEND emulsifier.
Glyceryl monostearate is low HLB emulsifier - preferably suits W/O emulsion. Or it can help with rubbing time and viscosity, however as you are using Dimethicone, that won’t be your issue. You can get rid of it.
So looking over the formula, you have one anionic emulsifier, one W/O emulsifier and a bit of thickener/co-emulsifier. That is why people didn’t like it.
The W/O emulsifier would most likely destabilize you formula.

The 0.8% fragrance is making me dizzy Typical fragrances input for facial product is 0.2%. For me, sometimes even 0.1% is too much. That’s where, most likely, the irritation comes from.

!!!!! Also, those preservatives can be also irritating. And they work ONLY in lower pH. According to your TEA input, I’m pretty sure you have not reached this and bang, you have contamination/microbial growth!!! . Use some Euxyl PE 9010 or similar. !!!!!

Ok, I think I’m done

The TEA saponifies the Stearic acid to make it a real emulsifier.