No more formaldehyde - How to modify a cosmetic

J&J seems pleased with themselves for capitulating to fear mongering groups and reformulating their iconic J&J Baby Shampoo.  We previously wrote about why caving to fear mongering groups is a bad thing so I won’t talk about that now.  What I wanted to talk about was the formulation process by which J&J changed their formula.

Start with a formulation goal

According to the NY Times article, J&J had a specific goal in reformulating their product.

Remove formaldehyde, reduce 1,4 Dioxane levels and make the changes invisible

While this seems like a straightforward goal, we’re talking about a formula that has been on the market, unchanged for decades.  This has the potential to be as significant as changing the formula for Coca Cola.  A mistake could be disastrous for the brand.  Undoubtedly, they had to run numerous consumer home use tests to demonstrate that there was no noticeable difference in the new formula versus the old.

Keep changes minimal

If you look at the ingredient list from the formula they started with to the one they ended up with, there are very few changes.  These include

  • Removal of Quaternium-15 (preservative)
  • Addition of Phenoxyethanol, Sodium Benzoate, & Ethylhexylglycerin (preservative)
  • Addition of Glycerin (for feel?)
  • Addition of Potassium Acrylates Copolymer (for thickening)
  • Swap Yellow 6 for Orange 4 dye

J&J baby shampooApparently, when they swapped out the Quaternium-15 preservative system with the PSE system, that caused the formula to drop in viscosity.  To fix that problem they had to add the Acrylates Copolymer.  And fixing that may have caused the product to feel a little different so they added some Glycerin.  I’m skeptical the Glycerin would do much but perhaps it could affect the way the product feels in your hand.

The dye change was probably the result of a color change caused by the other substitutions.

But you can see it wasn’t such a simple task to modify the preservative.

Test to ensure parity

After 2 years of work by 200+ people, they finally came up with a prototype that met the goal and was not noticeable by consumers.  To ensure parity they probably followed a three step process.  First, match the performance of key characteristics in lab tests (like foaming, viscosity, color match, etc).  Second, conduct small 10 - 15 person panel tests to ensure that the formulas look, feel and perform the same.  Lastly, conduct a full 200+ person consumer home use test with the best performing prototypes.

Of course, this is usually not good enough to convince upper management that a change will be unnoticeable.  The final final step is to give samples to the higher ups in a blinded fashion and get their blessing.

I don’t really agree with the decision that J&J made to cave in to pressure from consumer groups and change their perfectly safe formulas to a slightly different, but perfectly safe formula.  However, it did employ the efforts of over 200 people for the last 2 years and that seems like a good thing.  Unfortunately, this work didn’t lead to anything that was innovative or more useful for consumers.

It was a lot of work to stay exactly where they always were.

Related Articles

How to Become a Cosmetic Chemist

The job of a cosmetic chemist, or as they call it in the UK a cosmetic scientist, requires you to do a wide variety of things both in and out of the lab. Your main responsibility will be that of a formulator. This means you mix raw materials together to create cosmetic products like lipstick, nail polish, skin lotions, shampoos, toothpaste and any other type of personal care product.

Free Report

Sign up now to get a free report "How to Duplicate any cosmetic formula". Plus a 4-part introduction to cosmetic science mini-course.

We respect your email privacy