chickenskin
About
- Username
- chickenskin
- Joined
- Visits
- 205
- Last Active
- Roles
- Member
Comments
-
most likely 6-7
-
@PhilGeis Personal project no intention on developing beyond personal use.
-
@Perry Long shot here but possibly residue from cleaning hydraulic pumps and mixing shafts?
-
@Pharma Thank you for the thoughts on this. For interactions you answered what I was looking for. My plan is to make a cream with about 10%-15% Progesterone. This will not be labeled with any claims or intended use/dosage. Can't find much on t…
-
thanks team oil phase! just needed some realignment.
-
(Quote) Thanks Perry!!!!!!
-
Thank you for the comments. I know this is OTC, I am familiar with the monograph. I am trying to find the cause of the tiny grains 'barely visible' that form over time (2 days). Anyone ever see this? I am thinking it's a preservative interaction…
-
in situ.... meaning in place of... in place of what? Stearic acid : TEA 2:1
-
Add more SLES and it should thicken more. This should be stable but I don't know what else you have in it? Chelator? Preservative? Electrolytes? Emollients / Humectants? Fragrance? Little bit more detail and I can sort you out.
-
Mark Thank you is there a reference for this? Thank you!
-
https://www.in-cosmetics.com/__novadocuments/604966?v=636991511501200000
-
Good explanation. I could see why people would think the v/v would equal w/w. Hydrogen Peroxide interacts with ethanol and partially inactivates the oxidative properties I thought. Nice Matt
-
(Quote) Where are you at?
-
see attached
-
Try removing the Polyqaut and see if you get the same result.
-
https://www.praannaturals.com/
-
Generally it's mixed with a solubilizer then dumped in before salt addition (if needed) or it's added at the end at room temperature. What specifically is the LOI?
-
(Quote) Thanks Perry I sent you a PM.
-
@Perry Would you be willing to talk to the founder about your concerns?
-
yes. you need to use HIGH MELT TEMP shea.... try sheasoft from AAK.
-
just stir heat the batch up to 70C.... without neutralizing. add your cbd.... cut the heat and stir in the TEA... should go in just fine. done this many times
-
What quantity? I have a contact in East Africa
-
Looks like your Xanthan isn't fully hydrated yet. You might want to try premixing it in glycerin before adding, or adding in the beginning and allow it to fully hydrate.
-
https://www.walgreens.com/store/store/product/view_product_details.jsp?id=prod4481#! Is this the product you are using as a benchmark? If so I already have this formulated. PM and I can help you.
-
https://www.ulprospector.com/en/na/PersonalCare/Detail/605/25098/Ethox-MI-9?st=1&sl=82512740&crit=a2V5d29yZDpbNTYwMDItMTQtM10%3d&ss=2&k=56002-14-3&t=56002-14-3 same CAS as PEG-10
-
https://www.ulprospector.com/en/na/PersonalCare/search?k=Tribehenin&st=1
-
@SkinNP Chelating agents (i.e., Na4EDTA) remove the cations and increase the permeability of the outer membrane to large hydrophobic molecules, antibiotics and preservatives. This increase in antimicrobial activity produced by a chelating agen…
-
(Quote) this made a brick hahaha!! i was doing better with the lower wax but ill update once I figured out the drying by adding more silica!
-
@ngarayeva001 https://www.thedetoxmarket.com/collections/hush-dotti/products/hush-and-dotti-organic-gel-eyeliner its a paste
-
@ngarayeva001 gotta stick to the ingredients. :(
Latest Q&A session
Forum Instructions
Howdy, Stranger!
It looks like you're new here. If you want to get involved, click one of these buttons!
