David08848

About

Username
David08848
Joined
Visits
2,854
Last Active
Roles
Member

Comments

  • (Image)
  • Well, I'm looking for a scale with a tare feature that can weigh from 0.1 ozs. to 20 to 25 lbs.  I don't need any fancy features just the ones above and I need it to last 4-5 years.  I would like it in the $90-$120 range.  As I mentioned before I ha…
  • So, in trying to go through the processes for the Ohaus Trooper we did try what I think was the calibration.  In doing so, we put the eight 500g weights on the scale with "Cal" showing on the screen and it read the eight weights and when w…
  • Update: Thanks guys for your replies!  Syl, I did have a copy of the manual from that link but I looked around and found the original document!  I also found 8 500g weights that I purchased several years ago to somehow make it work and I had assist…
  • Syl, I called them today, talked about the 2 machines which need help.  They were so old that the guy I spoke with really didn't seem to know enough.  If we were going to try to "calibrate" it, I was told that I needed a 30 POUND weight to…
  • (Quote) 
I certainly can agree with you on the price of this line of products!  It is difficult finding a scale that works well, lasts for a long time without any problems, and is easy to operate!  The Instruction Manual that comes with the …
  • After numerous attempts online of finding out the appropriate numbers of each ingredient in Tea Stearate, I finally found the answer by typing in "2 parts Stearic Acid to 1 part Triethanolamine for Tea Stearate" in my browser and came up w…
  • (Quote)
  • chemicalmatt,  Maurice was also a member of a board called "The Soap Dish"  where he helped and gave advice to home-crafters making soap and cosmetic type products.  I saw the value in his posts and joined his Yahoo Board where I learned a…
  • I was fortunate quite a few years ago to be able to communicate with the late Maurice Hevey who was a cosmetic chemist who was on a Yahoo Cosmetic Chemistry message board and he helped many people (just as Perry does now) to understand the basics of…
  • Thanks guys, Sorry, but I guess I wasn't clear about a few things.  What I am trying to find out is about a particular kind of shaving cream that is soap based and made with Fatty Acids like Stearic and Myristic Acid as well as Coconut Oil or Coconu…
  • One listing mentions that  these two ingredients are "humectants/moisturizers (for example, glycerin, glycerol, sorbitol and other polyols)" which in effect create more lubricity in a stearic acid, myristic acid and coconut fatty based soa…
  • Cafe33, You must have found formula #2226 of Poucher's as there are very few formulas with Stearic, Myristic and Coconut in them!  This one isn't even a lathering cream either!  The problem I have encountered the most is that so many of the "sh…
  • Hi! Yes, I am familiar with that formula.  It was listed here by "saleem" and it is available online from various sources starting with books but also in .pdf form which has the "Palm Oil" listed but the original formula actually…
  • Whenever I use an additive that is finely ground like an herb, spice or other similar things I have added it to the oil phase.  That way it can absorb the oil first rather than absorbing the lye into it from being in the water/lye bath.  I have done…
  • In essence, you are making a soap out of Stearic Acid and Sodium Hydroxide so you need to find an online lye calculator, put in the amount of Stearic Acid you wish to use and it will calculate the amount of Sodium Hydroxide needed based on the SAP v…
  • Sodium Stearate is made from Sodium Hydroxide and Stearic Acid.  Are both of those available in your country?  If so then you should be able to make it yourself.
  • Benz3ne, As long as it works for you!  I'm selling to the "shaving community" out there online and they are quite a tough crowd with lots of experience with all of the varieties of Lathering Shaving Cream made and sold all over the world w…
  • (Quote) 
Benz3ne, I agree with you.  We're here to learn so let's see what we come up with!  The two issues which I see are the "TEA" listed and the amount of NaOH used and the ratio between the NaOH and KOH which are covered in ma…
  • Belassi, Sorry I didn't see this!  I an familiar with this formula as it is part of my 600+ page research document on Shaving Cream.  Your post calls it "soap" as some guys do call shaving cream.  I have never seen a formula like this turn…
  • (Quote) 
Thanks again!  I think you made a point that I didn't get at the time.  Although you can make a lotion by heating up the stearic acid and adding the triethanolamine to it until it becomes saponified and hard then either grind it int…
  • Both Bill and Belassi made some good observations which I noticed looking back at this for one more attempt at making improvements on my formula!  Looking back at the pictures I posted I now see a few tiny lumps in the first one and can see more cle…
  • (Quote) 
OK!  That is valuable information!  Thank so much for your help, chemicalmatt! David  :)
  • So this is what I have found so far online: "Stearic Acid 

Stearic acid is the
saturated fatty acid or waxy solid used as a hardening agent or
lubricant. This acid helps make skincare creams and lotions “sprea…
  • Thanks for your replies.  I did notice and VENZEN brand name and the Estee Lauder looked interesting...with 51 ingredients!
  • I haven't encountered anything like this before and I guess that there could be a few products out there that are fakes.  I was just wondering if it was some sort of "vanishing cream" like existed a hundred years ago.  Those were simple fo…
  • Thank Dr_Sara, I have been looking at quite a few brands online and had a difficult time finding what I need for the price I need to pay. I have even done a major search today on Amazon for companies all over the world selling though Amazon and foun…
  • The shaving soap puck is exactly 3" diameter X 1" in height.  From what I have seen most containers taper in at the neck (top) and the photos show them to be smaller at the top than at the middle to bottom of the container. Thanks!
  • Well, I have spent lots of time trying to find just the right container and was going to settle on one I found from Papermart until I decided to try and verify the diameter of the inside of the top of the container and the diameter of the lower port…
Avatar

Latest Q&A session

Forum Instructions

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

30DaysToBecomeABetterCosmeticChemist_cover (1)