Anti bacterial floor cleaner

gaurangwalunjgaurangwalunj Member
edited August 12 in Formulating
I am formulating a floor cleaner with following ingredients.
BK50- 2.45 % w/w
Lauryl alcohol ethoxylate-5%
CAPB- 0.5%
Sodium bicarbonate-5%
EDTA-0.2%

Above formulation gives good cleaning. But I just wanted to that whether sodium bicarbonate and LAE quantities are not in excess and whether it will be too harsh on skin.

Comments

  • Floor cleaner - but too harsh on skin?
    Cosmetic Product Development
    Sussex Research Laboratories Inc.
    www.sussex-research.com
  • ozgirlozgirl Member, PCF student
    What is the purpose of the sodium bicarbonate? It seems unnecessary.

    It is most likely that this formulation going to be irritating to skin/eyes because benzalkonium chloride is corrosive to skin and eyes at high concentrations. Your customers should not really be putting floor cleaner on their skin so there shouldn't be a problem as long as the product is labelled correctly. 
  • I am formulating a floor cleaner with following ingredients.
    BK50- 2.45 % w/w
    Lauryl alcohol ethoxylate-5%
    CAPB- 0.5%
    Sodium bicarbonate-5%
    EDTA-0.2%

    Above formulation gives good cleaning. But I just wanted to that whether sodium bicarbonate and LAE quantities are not in excess and whether it will be too harsh on skin.
    Unless that's a rinse off formulation, it is guaranteed to leave a white residue on floors.

    While 5% lauryl alcohol ethoxylate will give a nice foam and cleaning, it may leave a residue if it's not rinsed out off floors.

    No need for CAPB

    Na2CO3 will leave a white residue for sure.
    You can even remove, or further reduce EDTA. Being a salt it will leave a white residue too.

    What's BK50?
  • @Gunther@ozgirl.. thanks for your advice. @Gunther BK50- is benzoalkonium chloride 50 % solids.
  • @ozgirl T pH of this formulation is high 8-9. Can I use citric acid to bring to 6-7.
  • PharmaPharma Member, Pharmacist
    You could but it would make bubbles because of the reaction of bicarbonate with acid.
    For cleaning, sodium carbonate is usually employed since it's high pH (unlike pH neutral bicarbonate). This helps removing fats and oils. If that is not needed, there is no need for high pH and you can avoid sodium (bi-)carbonate addition.
    You sure you added sodium bicarbonate (usually for eating/cooking) and not sodium carbonate (usually for cleaning)? Some of their colloquial names are identical (e.g. natron) ;) .
  • ozgirlozgirl Member, PCF student
    As Pharma mentioned floor cleaners and hard surface cleaners usually have a high pH to help with cleaning.

    A pH of 8-9 is not considered high.  As a comparison soap generally has a pH of 9-10 and is used on skin.
Sign In or Register to comment.